Booster · Quick Start Guide
Booster T1 / K1 Quick Start Guide
There's no official quick-start guide for the Booster T1 / K1 — Booster hasn't published one. The procedure below is distilled from owner experience and the model's known characteristics: it's practical, but it's not a substitute for manufacturer documentation when it appears.
The universal humanoid first-boot still applies: full charge, clear flat space, power-on, controller pairing, then a guided first stand. Don't rush to dynamic movement on day one.
What this document covers
- ✓Unboxing checklist: what's in the case and what to inspect
- ✓Full first charge — partial charges cause most failed first startups
- ✓Power-on sequence and remote-control / app pairing
- ✓The guided first stand: posture checks before locomotion
- ✓Clear-space and safety-perimeter setup for early operation
- ✓First-week checklist: fastener checks, firmware, and baseline behavior
Official quick start guide
No public quick start guide has been published for the Booster T1 / K1.
We link only to official manufacturer sources — never rehosted PDFs or third-party mirrors — so when the manufacturer hasn't published a document, this page says so plainly instead of linking something unreliable. The closest authoritative source is Booster Robotics official site.
What we know about the Booster T1 / K1
Booster's official documentation is thinner than Unitree's — start with the support portal for repair and setup resources. Third-party 'T1 manual' PDFs circulate on mirror sites, but we only link official sources, so verify anything you download elsewhere against the support portal.
Request this manual and we'll expand coverage as Booster publishes more.
Booster T1 / K1 at a glance
- Type
- Research humanoid
- Use
- Research, education, RoboCup