EngineAI · Error Codes
EngineAI PM01 Error Codes
No public error-code reference has been published for the EngineAI PM01. EngineAI hasn't released fault tables, diagnostic-code lists, or troubleshooting flowcharts — so there's no official document to link to, and we won't invent codes.
What we can tell you from owner experience: most humanoid faults cluster in a few families — joint torque faults under load, battery/charging faults, IMU and sensor errors, and communication dropouts between joint controllers. The setup notes below describe the failure modes actually reported for this model.
What this document covers
- ✓Fault-code tables with causes and recommended actions
- ✓LED and status-indicator patterns during boot and faults
- ✓Joint torque faults: distinguishing calibration drift from hardware failure
- ✓Battery, charging, and power-distribution fault behavior
- ✓IMU, encoder, and sensor error handling
- ✓Safe recovery: reboot sequences, factory reset, and when to stop and call support
Official error codes & troubleshooting guide
No public error codes & troubleshooting guide has been published for the EngineAI PM01.
We link only to official manufacturer sources — never rehosted PDFs or third-party mirrors — so when the manufacturer hasn't published a document, this page says so plainly instead of linking something unreliable. The closest authoritative source is EngineAI official site (Chinese).
What we know about the EngineAI PM01
EngineAI's official site is Chinese-language, which is where PM01 specs and updates live. No English user manual has been published — browser translation of the official site is currently the most practical route for non-Chinese speakers.
Request this manual and we'll add English documentation if and when it's released.
EngineAI PM01 at a glance
- Height
- 1.38 m
- Degrees of freedom
- 24
- Top speed
- 2 m/s