Apptronik · Quick Start Guide
Apptronik Apollo Quick Start Guide
There's no official quick-start guide for the Apptronik Apollo — Apptronik hasn't published one. The procedure below is distilled from owner experience and the model's known characteristics: it's practical, but it's not a substitute for manufacturer documentation when it appears.
The universal humanoid first-boot still applies: full charge, clear flat space, power-on, controller pairing, then a guided first stand. Don't rush to dynamic movement on day one.
What this document covers
- ✓Unboxing checklist: what's in the case and what to inspect
- ✓Full first charge — partial charges cause most failed first startups
- ✓Power-on sequence and remote-control / app pairing
- ✓The guided first stand: posture checks before locomotion
- ✓Clear-space and safety-perimeter setup for early operation
- ✓First-week checklist: fastener checks, firmware, and baseline behavior
Official quick start guide
No public quick start guide has been published for the Apptronik Apollo.
We link only to official manufacturer sources — never rehosted PDFs or third-party mirrors — so when the manufacturer hasn't published a document, this page says so plainly instead of linking something unreliable. The closest authoritative source is Apptronik official site.
What we know about the Apptronik Apollo
Apollo is deployed through enterprise pilots, not sold retail, so Apptronik publishes no public manual. (Note: an 'Apollo User Manual' PDF floating around the web is for an unrelated GPS beacon — not this robot.)
Request this manual and we'll publish official docs here if Apptronik ever releases them.
Apptronik Apollo at a glance
- Height
- ≈ 1.73 m
- Payload
- ≈ 25 kg
- Availability
- Enterprise pilots